Welcome To personalized gift for mother's
personalized housewarming gifts Needle Point Laser for Q Series Longarms decorative pillow shams

I am so excited about the Needle Point Laser for all of the Q Series Longarms from BERNINA. I wanted to give it a try with Free-motion embroidery foot #24 so that I would have the best view of where I wanted to start stitching or mark the block.?I looked on the BERNINA website and found a video on how to install and use the new Needle Point Laser. I installed and adjusted the laser to line-up with the needle point as the video had explained. This is going to be amazing!

After I installed the laser I put on Free-motion foot #24. I also found a video on the BERNINA website that gave me great insight into this foot and some other free-motion feet.

personalized toys

I found some fabric in my stash and created a quilt block and stitched three blocks to make a table runner.

I loaded the frame and got ready to start stitching. I am stitching on a frame but if you have a Q 20 in a cabinet you can do the same thing. The Needle Point Laser works on all of the Q Series machine, frame or cabinet models. As for Free-motion embroidery #24 it is compatible with the Q Series even those it was created for the domestic line of machines. All of the free-motion feet for BERNINA’s current line of machines work on the Q Series.

The laser is mounted on the side and behind the needle so it is out of the way.

With Free-motion embroidery foot #24 on there is a great view of where you are going to stitch.

Place the laser on the point you want to mark or start stitching. The needle will hit right at that same point. Make sure you have aligned the laser before you start. This setting will hold for some time but always check to see if things are still lined up before you start another project.

Look how prefect it is.

I had so much fun using the Needle Point Laser with Free-motion embroidery foot #24. I used Q-matic designs to create my table runner but you could use free-motion if you wanted to.

Here are a few tips.

If your batting is lofty you may need to hold the quilt sandwich down with your fingers when working on the frame. This will help you to get a more accurate placing of the needle. If working on cabinet model this may need to be done also if batting is high loft.

Check the alignment of the laser ever so often. You never know what happens when you are not around and if the thumb screws are not tight the laser may shift a little.

Remember you have the three different settings for the laserpersonalized housewarming gifts, “0” is OFF. This is for when you just don’t need to use the laser.

“I” is ON. This keeps the laser on all of the time. So while stitching, using to place design with Boundary or Marker in Q-matic or just so you know where the needle will touch the quilt sandwich.

“A” is AUTOMITIC which turns itself off when you are stitching. If you have no need to see the laser while you are stitching but need it on every time you stop and are ready to place design then this one is for you.

Hello! My name is Karisa, I'm the gal behind the blog Petite Modern Life, and I'm so excited to be sharing on DTLB for the second time!

While the division lines are clearly drawn between dog lovers and cat enthusiasts there can be no doubt that Britain is an island of pet lovers. Our homes just wouldn’t be the same without our furry friends- rabbits, rodents, guinea pigs, even squirrel monkeys are getting a look in these days! And while they are all cute as can be, and lots of fun to care, for they do all unfortunately bring with them a distinct trail of devastation!

If you have ever owned a portable chair, tent, or other outdoor equipment then you have probably experience the difficulty of putting that item back into the bag it came in. Perhaps the bag has been lost, torn or is just too tight of a fit. This is especially true with tents. These instructions will show how to make a bag for the portable chair but it will also show alternatives to make an easy cover for dutch ovens, sleeping bag or other equipment. Canvas works well because is durable, sturdy and easy to sew with. If you want to make it water proof you can use waxed canvas or industrial nylon.

Powered by personalized gift for mother's @2018 RSS Sitemap html Sitemap

Copyright 站群系统 © 2013-2019 Personalize